Think Carefully About Your Curtain Wall Installation

 As it is well acknowledged, even a well-designed glazing system can be easily degraded by poor installation methods. Curtain walls are generally highly engineered and factory built with close tolerances. However, the placement of these precisely manufactured assemblies on a structure with much greater dimensional tolerances can lead to issues with the overall facade, such as air and water leakage as well as unanticipated repairs. 

As a rule, curtain walls are typically installed from the outside, and the panels are lifted into place by a crane or a hoisting rig. If the anchors are not cast directly into the slab, field installation begins with the layout and installation of anchors on the slab edges. The panels are then fastened to the anchors. The curtain wall contractor will rely on the offset lines and elevation benchmarks set by the general contractor. Any error in setting these lines will impact the installation of the wall. All such marks should be set well in advance of the curtain wall construction so as to allow cross-checking and preparation by the curtain wall contractor. In addition, wind is a limiting factor during installation as the panels are heavy and have a large surface area that can be affected by wind and be difficult to place. Extreme cold and extreme heat are also problematic because these systems are designed to close tolerances, and the weather can impact both the worker and the materials being handled. On the other hand, the worse quality of curtain wall buildings can be affected by poor workmanship due to rushed installation, working in inclement weather, having multiple or untrained trades involved, and having complicated design details. Installation issues are not always attributable to the facade/cladding installation. Variations in the tolerances of the building frame elements can be a significant quality issue when installing curtain walls. 

Curtain walls have an advantage for adapting to these variations than window walls since they are installed outside of the building and attach to the building at point anchors only. In the current market, transoms and mullions are regarded mostly used curtain wall frames, transferring the loads from the glass panels to the connections. The glazing panels should be designed to resist the wind loads at the specific height while having the required thermal insulation. Transoms and mullions are the structural frames holding these glasses and transferring the loads to the main structure through the connections.

Preventing soaring prices as the resumption of production

Industry associations and Chambers of commerce may, according to the epidemic situation in different regions, provide services for steel pipe suppliers to restore production order, and support enterprises in low-risk regions to resume work and production in a comprehensive manner, enterprises in medium-risk regions to resume work and production in an orderly manner as soon as possible, and enterprises in high-risk regions to gradually resume work and production according to the epidemic situation.

Chambers of commerce of trade associations in other fields should actively coordinate with local governments to push enterprises that meet the requirements for epidemic prevention to start production as soon as possible. For industrial enterprises, especially private small and medium-sized enterprises, which have difficulty in resuming work and production of aluminium curtain wall in the years ahead, trade associations and Chambers of Commerce, should take the initiative to understand the actual difficulties of enterprises, report to relevant departments in a timely manner and coordinate with them to solve the problems. Qualified trade associations and Chambers of commerce can set up international and domestic procurement platforms for epidemic prevention supplies, organize collective procurement by private small and medium-sized enterprises, or coordinate and integrate industrial resources to produce their own products, so as to meet the urgent needs of the time. They should do their best to provide consulting services and technical support for the production of epidemic prevention supplies at full capacity, giving priority to the needs of medical personnel, public service industries and small green house when they resume work and production.

Associations and Chambers of commerce in labor-intensive industries should report the employment situation and employment difficulties to local governments or departments concerned in a timely manner coordinate the implementation of relief and relief policies, and ease the labor shortage and employment difficulties caused by the epidemic. We will encourage trade associations and Chambers of commerce to provide online vocational training to industry enterprises, and help them improve the quality of their labor force and restore their production capacity of curtain wall as soon as possible. Associations and Chambers of commerce in industries such as steel, coal, electricity, oil, natural gas and basic raw materials should advocate member enterprises to stabilize supply and prices, so as to prevent regional or time period shortages or large price increases brought about by the resumption of work and production. Trade associations and Chambers of commerce in the fields of railways, civil aviation, highways, ports, logistics, warehousing and distribution, and foreign trade should actively help enterprises in the industry, especially private small and medium-sized enterprises, to solve the problems of transportation, storage, distribution and customs clearance of raw materials and products.

Scientific and technological innovation building a strong steel country

 China's steel industry has a good foundation for high-quality development of galvanized steel pipe. From the scale of production, China already has the conditions and foundation to solve the production capacity and output problems of iron ore, coke, scrap, iron, steel and materials from the perspective of "resource-environmental protection cycle". From the process, equipment, automation, the whole of China's iron and steel industry equipment technology has reached or reached the world advanced level; large and medium-sized steel enterprises the main body of the equipment, has reached the international advanced level, advanced construction around the world. Intelligent technology has developed rapidly. From the varieties of research and application, the quality of square steel pipe is increasingly stable; Varieties are moving towards the middle and high end. Steel as a representative of a variety of advanced steel material varieties have been achieved a breakthrough; Some steel varieties reached the international advanced level. From the perspective of environmental protection technology, the total emission of pollutants and the emission of pollutants per unit product have been greatly reduced and the environment of iron and steel enterprises has been significantly improved.

In his report to the conference, expert pointed out that the connotation of high-quality development mainly includes four aspects: First, high-quality development is an active choice to adapt to the new normal of economic development; Second, high-quality development is the fundamental embodiment of the new development concept.Third, high-quality development is the inevitable requirement to adapt to the change of the principal contradiction in our society; Fourth, high-quality development of structural steel pipe is the only way to build a modern economy.

At present, the sustainable development of China's steel industry is facing a new situation and new tasks, which are mainly reflected in the following aspects: first, China's steel industry has made remarkable achievements in energy conservation and emission reduction; Second, ultra-low emissions put forward new requirements for energy conservation and emission reduction in China's steel industry. Third, environmental protection policies and standards are becoming stricter and historical problems have become new environmental risks for Chinese steel enterprises. Fourth, "dual control of energy consumption", "control of coal" and "reduction of carbon" have more severe constraints on steel pipe suppliers. Fifth, technological innovation is still difficult to fully support the demand for green development of China's steel industry;Sixth, promoting supply-side structural reform will remain the fundamental guarantee for the green development of China's steel industry. The marks of China's high-quality steel development success include four aspects: first, leading the scientific and technological innovation of the industry; second, leading the management innovation of the industry; third, making major contributions to the formulation of global industry rules; fourth, playing a leading role in undertaking global social responsibilities.

The main factors affecting the pipe market trend

 At present, the main factor affecting steel pipe market is still the supply and demand situation of rectangular hollow section. With the trade war, the market is dominated by supply and demand fundamentals.Among them, the focus of attention is still the change of market inventory. Although the overall increment is limited, the accumulative storehouse speed of the two storehouses is accelerated. Part of the increase of the two storehouses is individual storage in winter, but it is mainly caused by weak demand, and the market's expectation of accumulative storehouse after the festival is more obvious.

 

And the environmental production limit is expected last week after the release of concentrated good has been gradually digested by the market.In the case of high profits, steel pipe suppliers are still spare no effort in the production. Production limit is becoming strict in Tangshan area and the rate of blast furnace utilization has decreased, but there are still blast furnace production phenomenon of steel mills , some steel mills are preparing to resume production. According to the NDRC's website, in November, China's crude steel output reached 77.62 million tons, up 10.8 percent year-on-year, up 8.6 percentage points.Steel production rose 11.3 per cent, compared with a 2.9 per cent drop in the same period last year. From January to November, China's crude steel output was 857.37 million tons, with a year-on-year growth rate of 6.7% and a year-on-year growth rate of 1 percentage point.Steel output was 1012.92 million tons, up 8.3 percent or 7.2 percent. That will continue in the New Year, unless profits collapse, forcing mills to cut production of structural steel pipe.

 

In terms of demand, at present, the north has entered the winter break stage, and the construction in other places is obviously affected. Although the demand resilience exists, it is generally weak, which will become more and more obvious.Therefore, from the perspective of supply and demand, the market does not have the conditions for a big market. From the analysis of winter storage policy, up to now, some steel mills such as hegang, yaxin have started to issue winter storage policy, and some regions still think the current winter storage policy is too high.But the loan is also facing cost and threshold constraints, hollow section manufacturers at the end of the financial pressure is very tight.In the case of two consecutive years of losses in winter storage, businesses dare not rush to carry out winter storage operation, and another factor is the expected global economic downturn next year. Unless there is a significant pullback in January or a significant improvement in market expectations, this trend is likely to continue.

Tianjin scaffolding tubes

 In the current steel pipe market, there is a complete series of Tianjin steel pipes for your choice. You can always find your desired steel products based on your specific requirements of applications in life. For a long time, Tianjin scaffolding tubes are well-known for the excellent quality assurance and complete range of specifications, which have been widely used in a variety of construction projects around the world today.

In general, scaffolding tubes are usually selected based on the specific requirements of your project under construction in life. In the current steel pipe market, Tianjin welded steel pipes are your top choice to be used for scaffolding tubes in your construction projects. For example, hot dipped galvanized steel pipes have the rational cost effective performance in the current steel pipe market. Due to its durability and anti-corrosive properties, Tianjin hot dipped galvanized steel pipe can be recycled and be reused in projects, which to some degree save a lot of money during the post maintenance work. Furthermore, testing and studies have revealed that the average life expectancy for galvanized steel used as a typical structure material is well beyond 50 years in a rural environment and 20-25 years or more in an extreme urban or coastal setting. In that regard, you can confidently use this product in your project. 

Round steel pipe is another one typical scaffolding tube widely used in many large construction projects today. Tianjin round steel pipe has various specifications in the market. Tianjin steel pipe manufacturers all have been in an effort to produce products in strict accordance with the environmental protection standards all the time. Adhering to high quality and environmental products for the first principle, Tianjin round steel pipe wins very good credibility in the global steel pipe market. In that regard, it would be a better choice for you to purchase Tianjin round steel pipes used in your projects. In addition, Tianjin round steel pipe is one useful type of structural steel pipes in the market, which are usually used for steel structure in construction engineering, for framing tubes provide stability, uniformity, strength and soundness to structures that endure a great amount of stress. DongPengBoDa Steel Pipe Group is a famous steel pipe manufacturer in China. We are committed to providing your various types of structural steel pipes for your choice in the next project. Please contact us if you have any further question. 

Some favorite types of structural steel pipes used in greenhouse projects

 Are you still worrying about how to choose and use the proper steel frames in your greenhouse project now? As a rule, each project is judged on its use of structural steel pipe from both an architectural and structural engineering perspective. Therefore, it seems very significant for you to select proper structural steel pipe in your applications in future. 

Today, greenhouse frames can be constructed of several different types of materials. If you’re building a greenhouse, choosing which type of frame to use will be one of your first decisions. In the current steel pipe market, Tianjin steel pipes are available in a variety of structural shapes that are widely used for greenhouse frames today. Tianjin mild steel pipes are easy to fabricate, readily available, and cost less than most other metals. There are a few advantages of carbon steel pipes, such as shock resistance, safety, tensile strength and etc. Tianjin carbon steel pipe is highly resistant to shock and vibration, which makes it a best choice for using in greenhouse frame project today. Especially Tianjin mild steel pipes are very popular in greenhouse frames because they are durable and safe. Since steel is non-combustible and makes it harder for fire to spread, it is good to use in greenhouse frame project.

Welded steel pipe is a versatile building material, which has led to its inclusion in nearly every stage of the construction process from framing and floor joists, to roofing materials. There are many advantages of using welded steel pipe in construction including its strength, environmental friendliness, lower insurance premiums, design flexibility and recyclability. And other advantages of using welded steel pipe include energy-efficiency, durability, and resistance to water, fire and insect damage in various applications.

Cold rolled steel pipe can take an awful lot of strain in applications.  In essence, it has the highest strength to weight ratio than anything else that's used in the construction industry. At present, more and more building owners, designers, architects, and general contractors have opted for cold rolled steel pipe in commercial construction projects over other materials mainly for its energy efficiency, low maintenance, and durability. Besides, some other key attributes, such as striking beauty, clean look, and versatility in both new and retrofit construction are becoming helpful to firmly establish steel as the material of choice for institutional, commercial and education building projects.

What are the advantages of using Tianjin steel pipe in your construction projects

 Steel is a versatile building material, which has led to its inclusion in nearly every stage of the construction process from framing and floor joists, to roofing materials. Here are some of the main benefits that make structural steel such a reliable choice. At present, more and more building owners, designers, architects, and general contractors have opted for structural steel pipes in commercial construction projects over other materials mainly for its energy efficiency, low maintenance, and durability. Besides, some other key attributes, such as striking beauty, clean look, and versatility in both new and retrofit construction are becoming helpful to firmly establish steel as the material of choice for institutional, commercial and education building projects. 

Due to the great strength, uniformity, light weight, ease of use, and many other desirable properties, galvanized steel pipe has been widely used in a variety of practical purposes. There are a few advantages of using Tianjin steel pipe in your construction projects as follows: 

1. Steel frames save money.

One of the reasons that homeowners avoid steel is sticker shock. Compared to timber framing, the initial construction cost is typically more expensive. Long term, however, steel will end up saving everyone money. For you, the builder, you’ll find it cheaper to haul away scrap because it is recyclable, which means that waste removal companies often don’t charge to pick up your scrap steel. For the homeowner, the money savings come with things like maintenance and insurance. Tianjin steel pipes won’t rot, splinter or become damaged by pests, and insurance companies typically charge substantially less on homeowner’s insurance for steel frames over timber frames. 

2. Steel frame building materials are versatile.

No other building material can allow you to accomplish as much as you can with Tianjin steel pipe. Unlike timber, mild steel pipe is easy to shape, meaning that you can create all kinds of architectural interest. More importantly, however, is the fact that steel is more structurally sound than timber, which means that you can build much larger interior spaces without pillars or load-bearing walls. 

3. Tianjin steel pipe is the eco-conscious choice

There are many factors that make steel environmentally friendly. Tianjin steel pipes are recycled products, which means that any waste along with end-of-life steel building materials can be recycled.

These reasons should be enough for any builder to consider Tianjin steel frame building materials for their next project, but if you’d like to learn even more about steel building products, DongPengBoDa Steel Pipe is one of the famous steel pipe manufacturers in China. We would love for you to get in touch with us, let’s discuss your next project.